Things do not end with buying and installing a new garage door in Ferny Grove. The thing is, it require proper care and maintenance for them to retain their top quality and condition. In fact, even if you purchased a topnotch brand and a heavy-duty material, it is still a must that you do the right things to care for your garage door. Here are some tips on door maintenance that will help you keep the door looking and working like it is brand new and minimising the need for garage door repairs.
Garage Door Repair – Problems and Fixes in Ferny Grove
Most garage doors are sold on a parts only basis which can make them an ideal DIY project. Even so, it is important to bear in mind that fitting a garage door is not a simple undertaking, particularly if the door type involves a roller, sectional, or sliding door mechanism.
The first task is to decide which type of garage door, or garage door replacement is required. The options include: side hinged, up-and-over, sectional, roller, and sliding, with the options of manual or remote control operation.
All but side hinged doors will require the removal of the existing door and door frame (the frame can be retained for a hinged replacement door).
If there is to be a change in the door type, it is vital to ensure that the new mechanism (or frame) can be accommodated within the garage's entrance without snagging on any obstructions on the walls or roof.
Once the choice of door has been made, it will be necessary to plan the different fitting operations in sequence.
An up-and-over door
An up-and-over door requires the fitting of a frame which supports the door in its various positions and within which the door can travel through 90 degrees.
The fitting of this frame requires the setting out of the frame and its fixing points and the drilling (usually into masonry) for the screws and screw plugs. The support and fitting of this kind of frame will require a minimum of two people. There are two significantly different up-and-over door frame types - dependent upon whether the door has a canopy or a retractable motion.
Once the frame is fitted the door can be fed into the running tracks and any fine adjustments, to smooth-out the running mechanism, can be made accordingly.
A roller, sectional, or sliding garage door
Doors using a roller, sectional, or sliding opening and closing motion require more planning, more work and a higher level of precision.
All of these garage door types rely on a door that is composed of several hinged sections that bend or roll as the door is opened. This means that the door moves within runners that precisely guide the door at the top and the bottom, or along both sides, during its entire motion.
With this type of door mechanism, two sides of the door will be in constant contact with the tracks and they need to be in perfect alignment (either horizontally or vertically respectively).
When fitting one of these door types it is critical to ensure that there is ample room for the open door to stow-away above, or to the side of, the garage door opening.
Once this has been confirmed, the tracks can be fitted.
In the case of a sliding door, the tracks will run to one side of the opening and possibly to a more remote "door storage" area further away from the entrance. It is therefore important to buy a sufficient amount of track to transit the opened door to its resting location. The track will also have to be fitted in perfect "plumb", both above and below the doors intended running path.
This requires a smooth solid floor and a sufficient depth of vertical wall, or a structural roof, for the attachment of the fixings. There is less flexibility for "after fitting" adjustment with this kind of door.
A roller or sectional garage door stores above the door's opening and consequently requires some free roof space. This kind of door has both a transition frame (within which the door slides and folds) and a separate frame section, or roller, onto which the open door is stored/held.
It is important that the configuration of the transition and storage components of the frame are in good alignment and that the complete frame section is securely and safely fitted.
Garage Door Repair - Entrust It to an Expert
Have you grown tired of that rusty or rotted garage door that never seems to work quite the way it should? If you're in need of some serious repair or maintenance, but don't want to pay a professional to do the work for you, then perhaps you can do the work on your own. Installing a new system on your own is definitely possible and only requires a few tools and the right knowledge. Within a few hours you can give a brand new look to your home.
The following steps will provide you with the basics of installing a pre-hung garage door. Remember, it's important that you maintain safety while performing this task, and always consult the instruction manual if any questions ever arise.
Position The Bottom Panel In The Doorway
Install weatherstripping on the bottom panel and position the panel in the doorway. Temporarily hold the panel in place by tapping nails through either side of the panel brackets into the door jamb. When the panel is in place, attach hinges to the upper edge of the panel.
Install The Tracks
After locating the first panel in the proper place, install the tracks for the garage door according to the instructions which should be found in the instruction manual.
When the tracks have been set in place, install the rollers and any remaining brackets that either are to be installed onto the door itself or the wall frame, so that the door panels may be set into place.
Install The 1st Panel
Position one side of the panel into the tracks, and do the same for the other side.
Install The 2nd Panel
Prepare the second garage door panel by installing the rollers where necessary. When ready, lift the panel into place and insert the rollers into the tracks. You will want to get help from another person for this step.
Install the 3rd Panel
Prepare the third panel by installing the rollers as well as any brackets that are needed. Lift the panel into place and insert the rollers for this panel into the tracks. When the panel is in place, make sure the vertical tracks are fully fastened to the garage wall using lag bolts that are provided with the package At this point, make sure the door is level and the tracks are plumb.
Attach Jamb Brackets
Attach the jamb brackets and fasten them to the wall, ensuring that the lag screws are drilled into the solid framing boards for security.
Install Top Tracks
Install the curved and horizontal portions of the tracks according to the specifications set forth in the user manual. Be sure to rest the horizontal tracks on top of something so they do not swing free or fall down.
Install The Track Hanger
Check to see that the horizontal track is completely level. Attach the hanger mounting bracket to the ceiling in a solid position where the lag screws can be drilled into framing boards. Install one end of the hanger to the mounting bracket and then line up the hanger with the horizontal garage door track. Trim the hanger and then fasten the horizontal track to the hanger. Repeat this process on the other side with the other horizontal track section.
Install The Last Door Panel
When the horizontal track sections are in place, install the final door panel.
Install Torque Tube Or Tension Springs
If the garage door you are installing comes with a torque tube, you can install it according to the manufacturer specifications. If your garage door uses tension springs, you may need to call a professional because special tools are required to obtain the proper tension. Improperly installed springs can be a safety hazard for both property and people. When in doubt, call the professional.
If you have the right tools and the knowledge to complete the task, you can install that new system and give your home a new face lift.
Garage Door Remotes